Location: Home > Product  

DFW-2 Series
Cable Branch Box (EU)

DFW-2 Series Cable Branch Box (EU)


DFW series European Style Cable Distribution Box has significant advantages such as small length, clear cable arrangement, three-core cable, and no need for large span crossing. It is widely used in cable engineering equipment in power distribution network systems. The main feature of the DFW series cable distribution box is the two-way door opening, and the use of butt sleeves as the connection busbar. The cable connector used in the DFW series conforms to the DIN47636 standard, and generally uses a bolt-fixed connection cable connector with a rated current of 630A.

Contact us

Basic Parameters

Rated voltage: 12KV

Rated normal current: 630A

Rated peak withstand current (peak): 50KA/0.3s

Rated short-time withstand current: 20KA/3s

Power frequency withstand voltage (1min): 42KV

DC withstand voltage (15 min): 52KV

Rated lightning impulse withstand voltage (peak): 105KV

Ingress Protection Ratings of Cabinet: IP33

Application Environment

Ambient temperature: -35℃~+40℃

Wind pressure: ≤700Pa (that is, wind speed ≤34m/s)

Relative humidity: daily average ≤95%, monthly average ≤95%

Shockproof level: horizontal acceleration ≤0.4m/s2, vertical acceleration ≤0.15m/s2

Installation site: the surrounding air should not be obviously polluted by corrosive, flammable gas, water vapor, etc., the installation site should be free from severe vibration, and the inclination of the site should not be greater than 3°.

Note: If the actual application environment cannot meet the above requirements, please contact us.

* If you need to customize according to your special needs, please contact us.

  Get in touch with us now!

Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!

*Please check the trash box of your mailbox, if you do not receive our email.