ZGS11-12 Series
Outdoor Prefabricated Transformer Substation
Introduction
ZGS11-12 series American Outdoor Prefabricated Transformer Substation has the advantages of small size, easy installation and maintenance, low noise, low loss, anti-theft, full protection, and strong overload capacity. The ZGS11-12 series can be used as power transformation, metering, compensation control and protection device in the 10kV ring main power supply, dual power supply or terminal power supply system , and is widely used in the residential area, green belts, parks, stations, construction sites, airports and other places. The ZGS11-12 series meet the following standards: GB17467 "High-voltage/low-voltage Prefabricated Substation", DL/T537 "High-voltage/low-voltage Prefabricated Cubicle Substation Selection Guide".
Contact us
Basic Parameters
Rated voltage (kV): 10/4 (High-voltage/Low-voltage)
Maximum working voltage (kV): 12 (High-voltage side)
Rated frequency (Hz): 50
Rated capacity (kVA): 50~1600
Power frequency withstand voltage (1min) (kV): 35
Rated lightning impulse withstand voltage (peak) (kV): 75
Cooling method: Oil-immersed natural cooling
No-load voltage regulation: ±5%Ue; ±2×2.5%Ue
Noise level (db): 50
Ingress Protection Ratings of Cabinet: IP43
Application Environment
Ambient temperature: -35℃~+40℃
Altitude: ≤1000m
Relative humidity: daily average ≤95%, monthly average ≤90%
Installation site: no fire, no explosion hazard, no chemically corrosive gas, well ventilation, and the inclination of the ground is not more than 3°
* If you need to customize according to your special needs, please contact us.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.