YB-12 Series
Prefabricated Substation
Introduction
YB-12 Series Prefabricated Substation is fully complies with the GB17467 "High-Voltage/Low-Voltage Prefabricated Substation" standard, which can realize ring or terminal type power supply mode. YB-12 is widely used in urban public power distribution, street lamp power distribution, industrial and mining enterprises, urban buildings, residential quarters, oilfield terminals, hotels, parks and construction sites.
Contact us
Basic Parameters
Rated voltage (kV): high-voltage appliances: 6/10; low-voltage appliances: 0.4
Rated capacity (kVA): transformer: 50~1600
Rated short-circuit breaking current (kVA): high-voltage appliances: 31.5 (combination switch, depending on fuse)
Rated short-time withstand current (kA): high-voltage appliances: 16, 20(4s); low-voltage appliances: 15, 30(1s)
Rated peak withstand current (kA): high-voltage appliances: 31.5, 50; low-voltage appliances: 30, 63
Ingress protection ratings of cabinet: IP23
Applied standard: GT/T 17467; DL/T537
Application Environment
Ambient temperature: -25℃~+40℃
Altitude: ≤1000m
Temperature: monthly average temperature ≤+30℃, annual average temperature ≤+20℃
Relative humidity: daily average ≤95%, monthly average ≤90%
Shockproof level: horizontal acceleration ≤0.4m/s2, vertical acceleration ≤0.15m/s2
Installation site: no severe impact, no serious pollution and chemical corrosion, no conductive dust or explosion hazard. If those requirements cannot be met, please contact us
* If you need to customize according to your special needs, please contact us.
Get in touch with us now!
Please take a minute or two to complete this simple form to get reply in 24 hours, thank you!
*Please check the trash box of your mailbox, if you do not receive our email.